Development of analytical thermal analysis tool for synchronous reluctance motors
نویسندگان
چکیده
منابع مشابه
Optimum Design Parameters for Synchronous Reluctance Motors
A series of synchronous reluctance motors (RSM) are analysed using finite element methods. The amount of iron in each rotor is kept the same. It is shown that the saliency ratio is not only dependent on the flux guide reluctance factor but also on the position or span of flux guides. It is also shown that an axially laminated design may not be an optimum configuration due to large number of flu...
متن کاملUseful Software Tool For Simulating Switched Reluctance Motors
Simulations are widely used in the study of both electrical machines and drives. In the literature, several simulation approaches can be found which can be also applied in the study of the switched reluctance motors (SRMs). The on-line SRM simulation tool developed by the authors and presented in this paper proved to be very useful both in checking the design of the motor, but also in setting u...
متن کامل2D Analytical Modeling of a Wholly Superconducting Synchronous Reluctance Motor
An analytical computation of the magnetic field distribution in a wholly superconducting synchronous reluctance motor is proposed. The stator of the studied motor consists of three-phase HTS armature windings fed by AC currents. The rotor is made with HTS bulks which present the specificity to have a diamagnetic behavior under zerofield cooling. The electromagnetic torque is obtained by the int...
متن کاملInduction Motors Thermal Analysis
Original scientific paper The temperature distribution over the cross-section of an induction motor is calculated at the steady state and transient condition. In order to develop smaller and more efficient electric motors, there is a necessity to carry out more thermal analysis in parallel with the traditional electromagnetic design. It has been found that attention to the thermal design can be...
متن کاملSimple Design Approach for Low Torque Ripple and High Output Torque Synchronous Reluctance Motors
The rotor design of Synchronous Reluctance Motors (SynRMs) has a large effect on their efficiency, torque density and torque ripple. In order to achieve a good compromise between these three goals, an optimized rotor geometry is necessary. A finite element method (FEM) is a good tool for the optimization. However, the computation time is an obstacle as there are many geometrical parameters to b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IET Electric Power Applications
سال: 2020
ISSN: 1751-8660,1751-8679
DOI: 10.1049/iet-epa.2020.0237