Development of All-ceramic Artificial Teeth Using a High-speed Centrifugal Compaction Process with a 3D Printer
نویسندگان
چکیده
منابع مشابه
Development of a 3D printer using scanning projection stereolithography
We have developed a system for the rapid fabrication of low cost 3D devices and systems in the laboratory with micro-scale features yet cm-scale objects. Our system is inspired by maskless lithography, where a digital micromirror device (DMD) is used to project patterns with resolution up to 10 µm onto a layer of photoresist. Large area objects can be fabricated by stitching projected images ov...
متن کاملEffects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملUse of a 3D printer to create a bolus for patients undergoing tele-radiotherapy
Background: This study describes the possibility of implementing three-dimensional printing technology to create a precise construction of a planned bolus, based on computed tomography information stored in the Digital Imaging and Communications in Medicine (DICOM) format file. Materials and Methods: To create the bolus with a 3D printer, we converted data in the DICOM format to the s...
متن کاملeffect of taper on stress distribution of all ceramic fixed partial dentures: a 3d-fea study
statement of problem: mechanical failure of ceramic materials is controlled by brittle fracture, mostly occurred in tension. in 3-unit all-ceramic fpds the connector area is considered to be at fracture risk because of tensile stress concentrations. purpose: the aim of this fe analysis was to evaluate the effect of taper on stress distribution in all-ceramic fpds. materials and methods: in this...
متن کاملThinking like Archimedes with a 3D printer
We illustrate Archimedes’ method using models produced with 3D printers. This approach allowed us to create physical proofs of results known to Archimedes and to illustrate ideas of a mathematician who is known both for his mechanical inventions as well as his breakthroughs in geometry and calculus. We use technology from the 21st century to trace intellectual achievements from the 3rd century ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2016
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.63.524