Development of Abrasion-Resistant Members using Room-Temperature Curing UFC
نویسندگان
چکیده
منابع مشابه
studying room temperature curing of phenolic resin and their composites
phenolic resins are synthetic low molecular weight thermoset resins which are polymerized and cured to higher molecular weights by condensation method. these resins have high weathering resistance, high oxidative thermal properties and good chemical resistance. phenolic resins can be cured thermally or by acid curing. the most common method of curing phenolic resin is by thermal curing that tak...
متن کاملDevelopment of Lightweight, Corrosion-Resistant Magnesium Alloys Formable at Room Temperature
FINAL REPORT Background and Motivation There is a need for lightweight structural materials for transportation to improve the performance and energy efficiency. Because magnesium (Mg) is 36% less dense than aluminum (Al) (1.74 g/cm for Mg vs. 2.70 g/cm for Al), Mg-based alloys have received increasing attention lately. The limiting property of Mg and its alloys at the present time is poor ducti...
متن کاملstudy of room temperature curing of phenolic resin and its silica reinforced composites
phenolic resin is among the oldest thermoset resins that have found wide spread applications in several industries, largely due to its high thermal resistance. in this research, room temperature curing of phenolic resin and its reinforced silica composite has been investigated by p-toluene sulphonic acid as a catalyst. mechanical properties of the composites such as impact strength, flexural pr...
متن کاملthe effect of using visual aids on the development of speech act of disagreement among iranian intermediate efl learners
abstract the present study tried to investigate the effect of visual aids (films) on the development of the speech act of disagreement among iranian efl intermediate learners. to this end, the researcher selected 40 homogeneous intermediate learners based on their scores on oxford placement test. .the subjects then divided into control group and experimental group. both classes were tested by ...
Plastination by an Acid Curing Polymer at Room Temperature: A Pink City Technique
Plastination was invented at the Anatomical Institute of Heidelberg University, Germany by Dr. Gunther Von Hagens in the year 1979, which permits excellent preservation of biological material. Our objective was to develop cost effective plastination technique by use of acid curing polymer as compared to standard S10 technique for preparation of plastinated specimens used for teaching. Specimens...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 2013
ISSN: 0387-1061,2186-2753
DOI: 10.3151/coj.51.890