Development of a versatile procedure for the biofunctionalization of Ti-6Al-4V implants
نویسندگان
چکیده
منابع مشابه
Ti-6Al-4V for Orthopaedic Implants in Fatigue
S *in chronological order Additive Manufacturing in the Context of Structural Integrity Michael Gorelik, Federal Aviation Administration (FAA) Additive Manufacturing (AM) applications are poised to rapidly expand in aviation, driven by a significant number of business and technical benefits that are extensively covered elsewhere. Due to its inherent flexibility, AM is being considered for a var...
متن کاملFatigue of Ti-6Al-4V
Metallic biomaterials have essentially three fields of use; these are the artificial hip joints, screw, plates and nails for internal fixation of fractures, and dental implants. Any of these devices must support high mechanical load and resistance of material against breakage is essential. High mechanical properties are needed for structural efficiency of surgical and dental implants. But their...
متن کاملFabrication and characterization of the Ti-6Al-4V/Mg scaffold
Ti–6Al–4V scaffolds were fabricated by powder metallurgical space holder technique in this research. The most added magnesium (Mg) powder was evaporated and a skeleton of Ti-6Al-4V alloy was produced. For this purpose Ti-6Al-4V and Mg powders mixture compacted in a steel die by applying uniaxial pressure of 500 MPa before sintering the green product in a sealed quartz tubes at 900 °C for 2 hour...
متن کاملThe Design and Production of Ti-6Al-4V ELI Customized Dental Implants
The production of customized Ti-6Al-4V ELI dental implants by electron beam melting technology makes it possible to mass produce customized dental implants which introduce a porous surface to promote better osseointegration. By fabricating the root-form implant and the abutment as one piece, the authors expect to eliminate fracturing at the abutment screw and prosthetic screw. This paper descri...
متن کاملLASER SURFACE PREPARATION FOR ADHESIVE BONDING OF Ti- 6Al-4V
Adhesively bonded structures are potentially lighter in weight than mechanically fastened ones, but existing surface treatments are often considered unreliable. Two main problems in achieving reproducible and durable adhesive bonds are surface contamination and variability in standard surface preparation techniques. In this work three surface pretreatments were compared: laser etching with and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Surface Science
سال: 2016
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2016.06.139