Development of a Sludge Dewatering Filter and Utilization of Dried Sludge in Brick Making

Utilization of sludge as brick materials

Bricks manufactured from dried sludge collected from an industrial wastewater treatment plant were investigated. Results of tests indicated that the sludge proportion and the firing temperature were the two key factors determining the brick quality. Increasing the sludge content results in a decrease of brick shrinkage, water absorption, and compressive strength. Results also showed that the br...

Sludge Dewatering and Mineralization in Sludge Treatment Reed Beds

Sludge Treatment Reed Beds (STRBs) are widely used in Northern Europe to dewater and mineralize surplus sludge from activated sludge systems used to treat urban domestic sewage. STRBs are low-technology, energy-efficient, and do not require addition of chemicals. They dewater and stabilize the sludge and produce a final product that can be safely used as a fertilizer for agricultural crops. Lon...

Section Vi Review of Sludge Dewatering Techniques Vi-1 Section Vi Review of Sludge Dewatering Techniques

Effects of Using Arsenic-Iron Sludge in Brick Making

Leaching of arsenic from brick manufactured from arsenic and iron sludge has been investigated in this study. TCLP result shows that leached metal concentrations are far below the regulated TCLP limits and the quantities of metal leached from sludge are less than those from dried sludge. The results of Atterberg limits tests of moulded sludge-clay mixtures indicated that both plastic index and ...

Sludge Dewatering by Impulse Drying

An innovative and energy efficient sludge dewatering technology has been developed. The technology, impulse drying, involves briefly contacting the sludge under pressure with a heated surface. A unique feature of impulse drying is that the majority of moisture removal occurs as lipid water. A pilotand laboratory-scale demonstration was performed on low ash primary paper mill sludge. The pilot-s...