Development of a process model for the vacuum assisted resin transfer molding simulation by the response surface method
نویسندگان
چکیده
منابع مشابه
Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...
متن کاملInvestigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...
متن کاملMatrix Characterization and Development for the Vacuum Assisted Resin Transfer Molding Process
The curing kinetics and viscosity of an epoxy resin system, SI-ZG-5A, have been characterized for application in the vacuum assisted resin transfer molding (VARTM) process. Impregnation of a typical carbon fiber perform provided the test bed for the characterization. Process simulations were carried out using the process model, COMPRO [8], to examine heat transfer and curing kinetics for a full...
متن کاملinvestigation of parameters effect resin movement velocity at vacuum assisted resin transfer molding method (vartm)
in this paper, vacuum assisted resin transfer molding (vartm) method was simulated by analytical solution. then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...
متن کاملresin flow in fiber preformed by vacuum assisted resin transfer molding with flexible tools
vacuum assisted resin transfer molding, as a sub-branch of rtm is a method of manufacturing composite specimens. considering the industrial development of this method, different modified techniques are designed to improve its performance. among these techniques, using a half flexible mold is regarded as an important method. in this work, dominant equations of resin flow through the mold in pola...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2006
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2005.08.012