Development of a Precipitation-Strengthened Matrix for Non-quenchable Aluminum Metal Matrix Composites
نویسندگان
چکیده
منابع مشابه
Electrical Discharge Machining of Aluminum Metal Matrix Composites- A Review
Electrical discharge machining (EDM) is the process of machining electrically conductive materials by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. Aluminium metal matrix composites (AMMCs) refer to the class of light weight high performance aluminum ceramic material systems. The reinforcement in AMMCs could be in the f...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملLaser Ultrasonics for Non-destructive Evaluation of Metal Matrix Composites
Laser ultrasonics is based on the generation of elastic waves by transient surface heating or ablation with short laser pulses. These waves are traveling through the sample, are reflected and scattered at interfaces and the backside of the sample. To realize an ultrasound measurement device we have used either an interferometer coupled to a continuous wave laser (contact-free) or the sample was...
متن کاملBasics of Metal Matrix Composites
Metal composite materials have found application in many areas of daily life for quite some time. Often it is not realized that the application makes use of composite materials. These materials are produced in situ from the conventional production and processing of metals. Here, the Dalmatian sword with its meander structure, which results from welding two types of steel by repeated forging, ca...
متن کاملBi-continuous metal matrix composites
Bi-continuous alumina/aluminium composites were made by infiltrating an alumina preform which had the structure of a reticulated ceramic foam. The low density preforms were prepared from a polyurethane suspension of alumina powder which was pyrolysed and sintered after foaming. Higher density preforms consisted of ceramic foams with open cells. All these preforms were infiltrated with 6061 alum...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2016
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-016-1896-z