Development of a powder-metallurgy processed Nb3Sn wire.
نویسندگان
چکیده
منابع مشابه
Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy
Excellent mechanical properties and fatigue performance of Al/Al2O3 metal-based nanocomposites caused to introduce this material as a good candidate for various applications. In this regard, the preparation and characterization of this composite can be considered as a hot issue for research. The study was carried out in several steps including: (i) preparation of Al/Al2O3 metal-based nanocompos...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملCharacterization of the microstructure, tensile and creep behavior of powder metallurgy processed and rolled Ti-6Al-4V-1B Alloy
This work investigated the microstructure and elevated-temperature (400-475C) tensile and tensile-creep deformation behavior of a powder metallurgy (PM) rolled Ti-6Al-4V-1B(wt.%) alloy. The PM rolled Ti-6Al-4V-1B alloy exhibited a duplex microstructure, and it did not exhibit a strong α-phase texture compared with the PM extruded Ti-6Al-4V-1B alloy. The PM rolled Ti6Al-4V-1B alloy exhibited gre...
متن کاملINFLUENCE OF GRAIN SIZE ON MICROSTRUCTURE AND POROSITY OF BIOCOMPTIBLE TI-35,5Nb-5,7Ta ALLOY PROCESSED VIA POWDER METALLURGY
Beta-titanium alloys containing only fully biocompatible elements are very perspective materials for production of bioimplants. They have good properties for use as biomaterials, including above mentioned biochemical compatibility, low elastic modulus (important for biomechanical compatibility), in comparisson with previously used alloys. Moreover they are suitable for forging. Perspective meth...
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)
سال: 1987
ISSN: 0389-2441,1880-0408
DOI: 10.2221/jcsj.22.186