Development of a new PM titanium alloy for improved processability
نویسندگان
چکیده
منابع مشابه
[Development and evaluation of a new surface treatment method for titanium alloy implants].
We developed and evaluated a new method of titanium surface treatment for direct bone fixation of implants. This method consists of hydroxyapatite (HA) flame coating onto a porous titanium surface which is arc-sprayed with pure titanium material in argon gas at atmospheric pressure. The surface roughness of the porous layer was 360 μm, Rmax, and showed higher resistance to blast erosion in comp...
متن کاملa new approach to credibility premium for zero-inflated poisson models for panel data
هدف اصلی از این تحقیق به دست آوردن و مقایسه حق بیمه باورمندی در مدل های شمارشی گزارش نشده برای داده های طولی می باشد. در این تحقیق حق بیمه های پبش گویی بر اساس توابع ضرر مربع خطا و نمایی محاسبه شده و با هم مقایسه می شود. تمایل به گرفتن پاداش و جایزه یکی از دلایل مهم برای گزارش ندادن تصادفات می باشد و افراد برای استفاده از تخفیف اغلب از گزارش تصادفات با هزینه پائین خودداری می کنند، در این تحقیق ...
15 صفحه اولEffect of whitening toothpaste on titanium and titanium alloy surfaces.
Dental implants have increased the use of titanium and titanium alloys in prosthetic applications. Whitening toothpastes with peroxides are available for patients with high aesthetic requirements, but the effect of whitening toothpastes on titanium surfaces is not yet known, although titanium is prone to fluoride ion attack. Thus, the aim of the present study was to compare Ti-5Ta alloy to cp T...
متن کاملImproved adhesion between nickel–titanium shape memory alloy and a polymer matrix via silane coupling agents
NiTi wires were functionalized with silane coupling agents to improve interfacial adhesion between the inorganic constituent and a host matrix for composite applications. Surface derivatization was characterized by X-ray Photoelectron Spectroscopy, and mechanical pullout tests were performed to quantify the increase in adhesion between the NiTi shape memory alloy wires and polymer matrix. Impro...
متن کاملA New Low-Cost ¢-Type High-Strength Titanium Alloy with Lower Alloying Percentage for Spring Applications
Spring applications require materials that possess a low Young’s modulus and high strength, in addition to having a lower alloying percentage for reduced costs. In this study, a new low-cost ¢-type titanium alloy with a lower alloying percentage than conventional ¢-type alloys was developed for spring applications using [Al]eq and [Mo]eq. The alloy is located in the near-¢ region and its ¢ tran...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Technology
سال: 2005
ISSN: 0267-0836,1743-2847
DOI: 10.1179/174328405x18674