Development of a Micro-Tubular DMFC Fabricated by Plating Technique
نویسندگان
چکیده
منابع مشابه
Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing
Parallel Tubular Channel Angular Pressing (PTCAP) process is a novel recently developed severe plastic deformation (SPD) method for producing ultrafine grained (UFG) and nanograined (NG) tubular specimens with excellent mechanical and physical properties. This process has several advantageous compared to its TCAP counterparts. In this paper, a fine grained AZ91 tube was fabricated via multi pas...
متن کاملThe Development of a Micro-Fabricated CNT-Based Neutralizer for Micro-Propulsion Applications
This paper reports the preliminary development of a microand nano-fabricated carbon nanotube (CNT) –based electron source intended for micro-propulsion applications. The paper proposes a device that implements a trade-off between microfabrication complexity and performance using a 3D packaging technology to minimize interception and decouple the process flows of the grid and the emitter array. ...
متن کاملThree-dimensional micro-Fresnel optical elements fabricated by micromachining technique - Electronics Letters
There are two figures of merit used to assess the suitability of a nonlinear material for all-optical switching devices [8]. If the loss is dominated by linear absorption, W = A n l a must be larger than unity. In PTS, W > 1 for I > 20MW/cm2, based on attenuation coefficients estimated from those reported by Thakur, Frye and Greene [9]. In the case where two-photon absorption dominates the loss...
متن کاملA STUDY ON SINTERING BEHAVIORS OF COPPER COATED SIC COMPOSITE POWDERS FABRICATED BY ELECTROLESS PLATING AND MECHANICAL PROPERTIES OF THE CONSOLIDATED COMPOSITES
Copper coated SiC powders having three different amounts of copper, in the range of 20-60 wt%, were prepared via electroless coating process. The produced composite powders were uniaxially cold compressed and sintered at different temperatures and times under protective atmosphere. It was found that composite Cu/SiC powders and a relatively dense copper matrix composite with a uniform distribut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2004
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200421.0647pv