Development of a Decision Support System for Ankle-Foot Orthosis (AFO) Design Based on Lumped Parameter Models for Human Locomotion Prediction
نویسندگان
چکیده
منابع مشابه
a study on thermodynamic models for simulation of 1,3 butadiene purification columns
attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولEffect of ankle-foot orthosis (AFO) on body sway and walking capacity of hemiparetic stroke patients.
Body sway, the total length of the sway of the center of foot pressure (CFP) and maximum walking speed were examined with and without AFO in eight post-stroke hemiparetic patients. Without AFO, the CFP moved towards the non-affected limb and the body sway was large. Wearing AFO, the CFP shifted to the midposition and the body sway became small. Without AFO, the time to walk the prescribed dista...
متن کاملController Design for a Stance-control Knee-ankle-foot Orthosis based on Optimization Techniques
Design of active orthosis is a challenging problem from both the dynamic simulation and control points of view. The redundancy problem of the simultaneous human-orthosis actuation is an interesting exercise to solve concerning the analytical and computational cost effectiveness. The physiological static optimization approach tries to solve the actuation sharing problem. Its objective is to quan...
متن کاملEmbracing additive manufacture: implications for foot and ankle orthosis design
BACKGROUND The design of foot and ankle orthoses is currently limited by the methods used to fabricate the devices, particularly in terms of geometric freedom and potential to include innovative new features. Additive manufacturing (AM) technologies, where objects are constructed via a series of sub-millimetre layers of a substrate material, may present the opportunity to overcome these limitat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Human Factors and Ergonomics Society Annual Meeting
سال: 2019
ISSN: 2169-5067,1071-1813
DOI: 10.1177/1071181319631194