Development of a continuous tumbling fluidized bed coater and its characteristics.
نویسندگان
چکیده
منابع مشابه
design, development and evaluation of a continuous plug flow fluidized bed dryer
in this study, a laboratory scale continuous plug flow fluidized bed dryer was designed and constructed. a backward-curved centrifugal fan with a 4 kw electromotor was selected based on the maximum pressure drop in the minimum fluidization state and the ability to produce the velocity required for fluidization of the most granular agricultural materials. the fluidization chamber was a rectangul...
متن کاملControl of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملfluidized bed drying characteristics of soybeans
the present study investigated the influence of air temperature and velocity on the drying kinetics and specific energy consumption during fluidized bed drying of soybean at 80, 100, 120 and 140ºc and airflow rates of 1.8, 3.1 and 4.5 m s-1. six mathematical models for describing the fluidized bed drying behavior were investigated. the value of the drying rate coefficient (k) increased with inc...
متن کاملFluidization Characteristics of a Prototype Fluidized Bed Reactor
The fluidization characteristics of a prototype-fluidized bed laboratory reactor were understudied in order to investigate the suitable conditions at which the dehydrogenation reaction of butane could be carried out. To achieve this, a reactor with an effective volume of 1100ml was fabricated and coupled with temperature and pressure accessories. Zeolites were obtained from the market and clay ...
متن کاملContinuous Fluidized Bed Drying With and Without Internals: Kinetic Model
Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Powder Technology, Japan
سال: 1986
ISSN: 0386-6157,1883-7239
DOI: 10.4164/sptj.23.319