Development and Risk Assessment of Electro-Conductive Fiber "CNTEC" by Carbon Nano-Tubes Coating
نویسندگان
چکیده
منابع مشابه
PREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملHeat Transfer Enhancement by Nano Structured Carbon Nanotube Coating
The present work deals on the experimental investigation on the heat transfer and pressure drop characteristics of CNT coating on a stainless steel substrate in a rectangular macro channel with water as the working fluid. The experiments were conducted under both laminar and turbulent flow conditions with Reynolds number varying from 500-2600. The experimental results using an uncoated stainles...
متن کاملElectro-Catalytic Activities of Binary Nano-Composites of Pt and Nano- Carbon/Multiwall Carbon Nanotube for Methanol Electro-Oxidation
Binary nano-composites of Pt and nano-carbon (NC) and Pt and multiwalled carbon nanotube (MWCNT) have been prepared with varied compositions ranging between 20 and 80wt% Pt and investigated them as electrocatalysts for methanol oxidation. The study shows that with the increase in wt% of NC, the apparent electro-catalytic activity of the composite catalyst increases initially, reaches maximum at...
متن کاملCarbon-based Nano-electro-mechanical-systems
We provide an overview of our work where carbon-based nanostructures have been applied to twodimensional (2D) planar and three-dimensional (3D) vertically-oriented nano-electro-mechanical (NEM) switches. In the first configuration, laterally oriented single-walled nanotubes (SWNTs) synthesized using thermal chemical vapor deposition (CVD) were implemented for forming bridge-type 2D NEMS switche...
متن کاملDynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation
The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 2009
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.65.p_242