Development and Characterization of Al6061-Zirconium Dioxide Reinforced Particulate Composites
نویسندگان
چکیده
منابع مشابه
Characterization Of Particulate-Reinforced Aluminium 6061 / Boron Carbide Composites
Aluminum-based metal matrix composite (MMC) materials are used in the design of ground transportation vehicles and aircraft. Compared with conventional, unreinforced alloys, composite materials usually exhibit higher strength, both at ambient and elevated temperatures, as well as good fatigue strength and wear resistance. MMCs could be produced by variety of methods such as Stir cast, Liquid In...
متن کاملEffect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites
This article presents the investigative work conducted on the fracture toughness and microstructure of Al6061-9% graphite particulate composites. The requisite specimens for the fracture toughness testing were compact tension ones prepared using stir casting technique. The Al6061-9% graphite particulate metal matrix composite has been heat treated in the underaged condition. It is observed from...
متن کاملA Study on the Aging Behavior of Al6061 Composites Reinforced with Y2O3 and TiC
Abstract: The reinforcement particles play important roles in determining microstructural development and properties of Al6061 composites. In the present work, the aging behavior of Al6061 reinforced with Y2O3 and TiC particles produced via mechanical alloying are investigated. The results indicate that the peak-aged Al6061 alloy without reinforcement demonstrates the highest hardness, which co...
متن کاملPreparation and Characterization of B 4 C Particulate Reinforced Al - Mg Alloy Matrix Composites
This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering & Technology
سال: 2018
ISSN: 2227-524X
DOI: 10.14419/ijet.v7i3.12.15901