Developing a Protocol for Creating Microfluidic Devices with a 3D Printer
نویسندگان
چکیده
منابع مشابه
Rapid prototyping of microfluidic devices with a wax printer.
We demonstrate a rapid and inexpensive approach for the fabrication of high resolution poly(dimethylsiloxane) (PDMS)-based microfluidic devices. The complete process of fabrication could be performed in several hours (or less) without any specialized equipment other than a consumer-grade wax printer. The channels produced by this method are of high enough quality that we are able to demonstrate...
متن کاملUse of a 3D printer to create a bolus for patients undergoing tele-radiotherapy
Background: This study describes the possibility of implementing three-dimensional printing technology to create a precise construction of a planned bolus, based on computed tomography information stored in the Digital Imaging and Communications in Medicine (DICOM) format file. Materials and Methods: To create the bolus with a 3D printer, we converted data in the DICOM format to the s...
متن کاملDeveloping a Protocol for Psychiatric Social Work Interventions
Introduction: Psychiatric social work (PSW) is one of the most important areas of social work practice. So far, no protocol has been designed for these interventions in Iran. In this study, for the first time PSW protocol has been designed and presented. Methods: This study was conducted in three phases: desk review, directed content analysis and group discussion for receiving experts' comments...
متن کاملThinking like Archimedes with a 3D printer
We illustrate Archimedes’ method using models produced with 3D printers. This approach allowed us to create physical proofs of results known to Archimedes and to illustrate ideas of a mathematician who is known both for his mechanical inventions as well as his breakthroughs in geometry and calculus. We use technology from the 21st century to trace intellectual achievements from the 3rd century ...
متن کامل3D-Molding of Microfluidic Devices
Multilayer elastomeric device fabrication by replication molding requires a method for bonding together layers. In our development of solvent-resistant microfluidics, the goal with each promising new material or coating was to fabricate multilayer chips to evaluate crossed-channel valve performance and ultimately to implement functional elastomeric devices. However, determining a reliable adhes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Undergraduate Research and Creative Activities
سال: 2017
ISSN: 2168-0620
DOI: 10.7710/2168-0620.1088