Determination of zirconium oxide inclusion in Cu-Zr alloy
نویسندگان
چکیده
منابع مشابه
Formation, Thermal Stability and Mechanical Properties of Cu-Zr and Cu-Hf Binary Glassy Alloy Rods
Glassy alloy rods with diameters up to 1.5mm exhibiting a large supercooled liquid region before crystallization and high mechanical strength were formed in Cu-Zr and Cu-Hf binary alloy systems by the copper mold casting method. The large supercooled liquid region exceeding 40K was obtained in the composition range of 30 to 70 at%Zr and 35 to 60 at%Hf. The largest value of the supercooled liqui...
متن کاملProduction of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE)
This study focused on the effect of electro slag remelting process (ESR) on microstructure and composition of an as-cast alloy of Cu-Cr-Zr. These observations revealed that applying ESR process results in a more uniform distribution of alloying elements, however a slight aggregation of large precipitates and inclusions existed in as-cast ingot was found. Additionally, impurities like P, S and M...
متن کاملFormation of Amorphous Phase in the Binary Cu-Zr Alloy System
The aim of this work is to elucidate the formation of the amorphous phase in the Cu-Zr binary alloy system. It was found that 1 mm diameter rods with a fully amorphous structure can be prepared in a relatively wide range of compositions. In contrast, the formation of 2 mm diameter rods was achieved only for the Cu64Zr36 alloy and in the range of Cu53Zr47 Cu50Zr50, which are compositions near th...
متن کاملHigh-Temperature Stability and Grain Boundary Complexion Formation in a Nanocrystalline Cu-Zr Alloy
Nanocrystalline Cu-3 at.% Zr powders with 20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550–950 C. Annealing drove Zr segregation to the grain boundaries, which led to the formation of amorphous intergranular complexions at higher temperatures. Grain growth was retarded significantly, with 1 week of annealing at 950 C, or 98% of the ...
متن کاملEnhancement of Plasticity of Highly Density-Fluctuated Cu-Zr Amorphous Alloy
This study explores the plastic deformability of highly density-fluctuated states due to the different thermal quenching process of the binary amorphous metals, Zr67Cu33, with embedded nanocrystals, Zr2Cu. To know the effect of local structural fluctuation, we prepare 5 computational models with Zr2Cu-nanocrystals that undergo rapid heat up and cool down. The region of nanocrystals is correspon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1969
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.18.1236