Determination of water hardness by flow Injection spectrophotometry
نویسندگان
چکیده
منابع مشابه
Determination of nitrite by flow injection spectrophotometry using a home-made flow cell detector.
A simple, rapid, low cost and accurate determination using flow injection spectrophotometry with a home made flow cell detector, in combination with green LED and photodiode, had been developed for nitrite based on the Griess-Saltzman reaction, measuring the absorbance at 525 nm. The proposed system is able to monitor nitrite in freshwater samples at a throughput of 60 samples per hour with a r...
متن کاملDetermination of formaldehyde in foodstuffs by flow injection spectrophotometry using phloroglucinol as chromogenic agent.
A spectrophotometric method for the determination of formaldehyde in foodstuffs was described by using phloroglucinol as the chromogenic agent. The reaction between formaldehyde and phloroglucinol could occur rapidly at room temperature under mild conditions. The spectrophotometric measurements were conducted at 474nm of an unstable intermediate orange product of the reaction, which greatly inc...
متن کاملDetermination of formaldehyde in Brazilian alcohol fuels by flow-injection solid phase spectrophotometry.
In this work, a solid phase spectrophotometric method in association with flow injection analysis for formaldehyde determination has been developed with direct measurement of light-absorption in C(18) material. The 3,5-diacetyl-1,4-dihydrolutidine produced from the reaction between formaldehyde and fluoral P was quantitatively retained on C(18) support and the spectrophotometric detection was p...
متن کاملSequential determination of titratable acidity and tartaric acid in wines by flow injection spectrophotometry
A flow injection manifold is proposed for the sequential determination of titratable (total) acidity based on a pseudotitration and of tartaric acid based on the formation of a coloured vanadate complex. The method involves in-line dialysis prior to injection to avoid interference from the sample background absorption in the spectrophotometric detection. The changes in the colour of both reacti...
متن کاملNickel and zinc determination by flow-injection solid-phase spectrophotometry exploiting different sorption rates.
Flow-injection solid-phase spectrophotometry is applied for sequential determination of nickel and zinc, exploiting their different sorption rates on 1-(2-thiazolylazo)-2-naphthol (TAN) immobilized on C(18)-bonded silica. The Zn(II) sorption rate on the solid support is constant for flow rates ranging from 0.70 to 2.2 ml min(-1), but for Ni(II) the sorption rate decreases with increasing flow r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1984
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.33.2_110