Determination of uncombined barium oxide in barium titanate by the X-ray diffraction method
نویسندگان
چکیده
منابع مشابه
Barium Titanate Nanoparticles in Block Copolymer
Cubic BaTiO3 particles of∼10 nm were crystallized predominantly within the hydroxylated polybutadiene matrix of a phase separated triblock copolymeric thin film of polystyrene-polybutadiene-polystyrene (Kraton D1102). The barium titanated Kraton thin film had remnants of the cylindrical morphology of a plain Kraton thin film with an interdomain spacing of ∼23 nm. The procedure of barium titanat...
متن کاملVisualization of Polarization Domains in Barium Titanate
We present a combination of techniques from molecular, flow, and scalar data visualization to reveal the characteristics and processes in the data of this year’s IEEE scientific visualization contest. Among the challenges we had to address were the strong thermal vibration of the molecular data as well as the fact that the simulated material did not behave as we would have expected according to...
متن کاملRemoval of Barium Ions from Aqueous Solutions by Barium Titanate Using Radiotracer Technique:
The adsorption of barium ions on barium titanate in an aqueous solution was studied by means of batch technique as a function of Ba(II) concentration, temperature and solution pH using Ba-140 as radiotracer. The results show that adsorption is essentially complete in ca 180min and the steady state values of adsorption at various concentrations agree well with the classical Freundlich isotherm a...
متن کاملMorphology-controlled synthesis of barium titanate nanostructures.
This study reports the synthesis of morphology-controlled BaTiO(3) nanostructures such as spherical, cube-shaped and rod-shaped BaTiO(3) using a molten-salt synthesis method. This method synthesized products from a reaction of BaO/BaCO(3) and TiO(2) with a eutectic mixture of NaCl-KCl flux at 700 degrees C for 1 h. The experiment used powder X-ray diffraction, field emission scanning electron m...
متن کاملSynthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1973
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.22.255