Determination of trace impurities in high-purity aluminium oxide by spark source MS.
نویسندگان
چکیده
منابع مشابه
Direct Analysis of Trace Metallic Impurities in High Purity Hydrochloric Acid by 7700s/7900 ICP-MS
This application note illustrates the advanced analytical performance and robustness of the Agilent 7700s/7900 ICP-MS for the direct determination of metallic impurities in high purity concentrated hydrochloric acid (HCl). The 7700s/7900 incorporates an Octopole Reaction System (ORS), which effectively removes polyatomic interferences, allowing ultimate detection limits to be achieved for eleme...
متن کاملDirect analysis of trace metallic impurities in high purity hydrochloric acid by Agilent 7700s ICP-MS
This application note illustrates the advanced analytical performance and robustness of the Agilent 7700s ICP-MS for the direct determination of metallic impurities in high purity concentrated hydrochloric acid (HCl). The 7700s incorporates a third generation Octopole Reaction System, the ORS3, which effectively removes polyatomic interferences, allowing ultimate detection limits to be achieved...
متن کاملDetermination of Trace Elements in High-Purity Molybdenum by Solid-Phase Extraction/ICP-MS
We attempted a simple pretreating method consisting of solid-phase extraction using bonded silica gel with benzenesulfonic acid (SCX) as the solid-phase sorbent to determine trace elements in pure molybdenum samples by means of inductively coupled plasma mass spectrometry (ICP-MS). Molybdenum was anionized by adding hydrogen peroxide solution to a sample decomposed with acid, and separated from...
متن کاملDetermination of Trace Elements in High Purity Tungsten by Solid-Phase Extraction/ICP-MS
To establish a rapid trace-quantification scheme for elements contained in highly purified tungsten, we studied the most suitable conditions for separating the elements using solid-phase-extraction as a pretreatment for inductively coupled plasma-mass spectrometry (ICP-MS). We used chemically bonded silica gels belonging to the functional group of benzylsulfonic acid as extracting agent. Tungst...
متن کاملDetermination of Trace Anions in High Purity Waters by High Volume/Direct Injection Ion Chromatography
INTRODUCTION There has been considerable interest in the determination of anions at trace levels by IC. For example, the Electric Power Research Institute (EPRI) has established IC as the analytical technique for determining sodium, chloride, and sulfate down to 0.25 μg/L (ppb) in power plant waters. For high-purity water used in semiconductor processing, the Semiconductor Equipment and Materia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1986
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.35.8_753