Determination of trace arsenic and selenium in copper and nickel powders by hydride-generation atomic absorption spectrometry after Chelex separation.

Determination of trace selenium in urine by derivative hydride generation atomic absorption spectrometry.

Determination of Trace Copper(II) in Food Samples by Flame Atomic Absorption Spectrometry after Cloud Point Extraction

A new method for the determination of trace copper(II) in food samples by Cloud Point Extraction(CPE) combined with Flame Atomic Absorption Spectrometry(FAAS) is presented and evaluated. The method is based on the fact that hydrophobic complex of copper(II) with sodium diethyldithiocarbamate (DDTC) was formed at pH 6.0 and subsequently the hydrophobic complex was extracted into surfactant-r...

Speciation of Arsenic(III)/Arsenic(V) and Selenium(IV)/Selenium(VI) Using Coupled Ion Chromatography– Hydride Generation Atomic Absorption Spectrometry

Simple analytical methods have been developed to speciate inorganic As and Se in the microgram per liter range using coupled ion chromatography–hydride generation atomic absorption spectrometry. Because of the differences in toxicity and adsorption behavior, determinations of the redox states arsenite, As(III), and arsenate, As(V), and selenite, Se(IV), and selenate, Se(VI), are important. Anio...

Determination of selenium in Teucrium species by hydride generation atomic absorption spectrometry.

Hydride generation atomic absorption spectrometry (HGAAS) was applied for determination of selenium content in dried aerial parts of wild and cultivated Teucrium species (Lamiaceae) growing in Croatia: T. arduini L., T. chamaedrys L., T. flavum L., T. montanum L., T. polium L., and T. scordium L. subsp. scordioides Schreb. Special attention was paid to the wet oxidation procedure for the sample...

Determination of Arsenic in Biological Material by Hydride Generation Atomic Absorption Spectrometry Method

A hydride generation atomic absorption spectrometry method for arsenic determination in biological material was prepared. The samples were digested in muffle furnace at 550oC. The ash was dissolved in 4.5 N hydrochloric acid and the final solution was diluted in 10% hydrochloric acid. The arsenic was determined using a Perkin-Elmer atomic absorption spectrometer equipped with electrodeless disc...