Determination of Stress Strain State Components of Butt Welded Joint with Mild Interlayer Subjected to Elasto-Plastic Tension
نویسندگان
چکیده
منابع مشابه
Determination of Stress Strain State Components of Butt Welded Joint with Mild Interlayer Subjected to Elasto-Plastic Tension
Determination of stress strain state components of butt welded joint with a mild interlayer at elasto-plastic tension is presented in this paper. Function of normal transverse stresses distribution on the thickness of mild interlayer and equations for determination of the stress intensity maximum value in hard metal at elasto-plastic deforming are proposed. The longitudinal stresses of mild and...
متن کاملThe Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملThe Effect of the AA7075 Interlayer on the Microstructure and Mechanical Properties of the AA1050 Butt Joint Welded by FSW
In this research, the FSW Butt joint of commercial aluminum 1050 was investigated by using the 7075 aluminum alloy interlayer on the linear velocity of 30, 50 and 100 mm / min, and rotational speeds of 800 and 1200 rpm. A threaded cylindrical tool was used for joining of the 5 mm sheets. The OM, SEM, microhardness and tensile tests were done. The results shows that in sample with an interlayer ...
متن کاملThe Inherent Strain Method for Residual Stress Determination and Its Application to a Long Welded Joint
In this paper, we investigate a relatively new method for determining three-dimensional sub-surface residual stress (Ueda, 1975). This hybrid experimental/analytical method determines the source of residual stress by sectioning and strain measurement, and then uses it to deduce residual stress in the original body. When certain assumptions about the spatial distribution of the source of residua...
متن کاملStress Intensity Factor Expression for Welded Butt Joint with Undercut and Inclined Lack of Penetration Defects considering the Effect of Joint Shape
In this paper, the stress intensity factor (SIF) expression for defected butt welds containing undercut and inclined lack of penetration (LOP) subject to far-field tensile stress is derived. Some of the standards such as ISO 5817 and BS EN 25817 have specified allowable limits for the length of the undercut and LOP defects and for the height of the weld. In addition, EN 29692 standard has deter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Informatica
سال: 2006
ISSN: 0868-4952,1822-8844
DOI: 10.15388/informatica.2006.130