Determination of Shape Fixity and Shape Recovery Rate of Carbon Nanotube-filled Shape Memory Polymer Nanocomposites
نویسندگان
چکیده
منابع مشابه
A Shape Memory Polymer with Improved Shape Recovery
Thermally actuated shape memory polymers (SMPs) interest, both academically and industrially, due to their ability to memorize a permanent shape that is set during processing and a temporary shape that is later programmed by manipulation above a critical temperature, either Tg or Tm. However, the thermal triggering process for SMPs is usually retarded compared to that of shape memory alloys, be...
متن کاملShape xity and shape recovery of polyurethane shape-memory polymer foams
The thermomechanical properties of polyurethane shape memory polymer (SMP) foams were investigated experimentally. The results obtained can be summarized as follows. (1) By cooling the foam after compressive deformation at high temperature, stress decreases and the deformed shape is xed. Stress decreases markedly in the region of temperature below the glass transition temperature Tg during th...
متن کاملInvestigation of Interfacial Shear Stresses, Shape Fixity, and Actuation Strain in Composites Incorporating Shape Memory Polymers and Shape Memory Alloys
*Correspondence: Marcelo J. Dapino, 201 West 19th Avenue, Columbus, OH 43210, USA e-mail: [email protected] Shape memory composites (SMCs) based on shape memory alloys (SMAs) and shape memory polymers (SMPs) allow many design possibilities due to their controllable temperature-dependent mechanical properties. The complementary characteristics of SMAs and SMPs can be utilized in systems with shap...
متن کاملShape-Memory Polymer Composites
The development of shape-memory polymer composites (SMPCs) enables high recovery stress levels as well as novel functions such as electrical conductivity, magnetism, and biofunctionality. In this review chapter the substantial enhancement in mechanical properties of shape-memory polymers (SMPs) by incorporating small amounts of stiff fillers will be highlighted exemplarily for clay and polyhedr...
متن کاملStresses in Shape Memory Polymer-matrix Nanocomposites for Biomedical Applications
We report on the residual stresses in amorphous shape memory polymers reinforced with SiC particles. After 50% compression of the composite material at 25 °C, the SiC particles exhibit a compressive stress, which is almost completely released during heated recovery at 120 °C. The residual stresses in SiC hexagonal (6H) phase were estimated through the average change of the unit-cell volume. Lat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.07.362