Determination of Optimum Machining Condition for Surface Roughness Using Historical Data
نویسندگان
چکیده
منابع مشابه
Modeling and Analysis for Surface roughness in Machining EN-31 steel using Response Surface Methodology
This paper utilizes the regression modeling in turning process of En-31 steel using response surface methodology (RSM) with factorial design of experiments. A first-order and second-order surface roughness predicting models were developed by using the experimental data and analysis of the relationship between the cutting conditions and response (surface roughness). In the development of predict...
متن کاملNon-Contact Method for Surface Roughness Measurement After Machining
184 Non-Contact Method for Surface Roughness Measurement After Machining J. Valíček, M. Držík, T. Hryniewicz, M. Harničárová, K. Rokosz, M. Kušnerová, K. Barčová, D. Bražina 1 Institute of Physics, Faculty of Mining and Geology, VŠB Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic, corresponding author: [email protected] 2 Institute of Construction ...
متن کاملSurface roughness parameters determination model in machining with the use of design and visualization technologies
A virtual reality machine shop environment was developed for the determination of critical quantitative and qualitative machining process parameters. Material removal and milling machine axes kinematics are simulated in real time. The G-Code program serves as the input to the system. A graphical model for the calculation of quantitative data affecting the machined surface roughness was develope...
متن کاملdevelopment of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles
a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...
Influence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering & Technology
سال: 2018
ISSN: 2227-524X
DOI: 10.14419/ijet.v7i4.30.22013