Determination of Optimum Cutting Parameters in Sawing Process Using Diamond Cutting Disc by Taguchi Method
نویسندگان
چکیده
منابع مشابه
Revolution in Diamond Cutting: Laser Sawing of Diamond Crystals
Laser sawing of diamonds is beginning to revolutionize the diamond-cutting industry. Not only does the laser saw offer savings in time and money, but it also enables the cutting of material virtually unworkable by conventional methods and makes available an almost limitless assortment of fancy shapes. This article describes the components and operation of the laser saw, as well as the situation...
متن کاملEvaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملDesign optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method
In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....
متن کاملobtain the optimum parameters for cutting hard and tough material (hardox steel) by abrasive water jet cutting process
abstract: nowadays, the non-traditional processes such as “laser, edm and awj” used for cutting high thickness sheet metal. hardox is hard and tough steel alloy and it has many industrialize applications. one best process to cut the hardox is abrasive water jet (awj) cutting. it can cuts complex shape with high quality and accurate tolerance. awj cutting offers certain unique benefits such as...
متن کاملApplication of Taguchi Approach in the Optimization of Cutting Parameters in Micro-Ultrasonic Drilling Process
In the present research work, effect of several process parameters on the machining characteristics of borosilicate glass has been reported. The machining characteristics that are being investigated are material removal rate (MRR) and tool wear rate (TWR). Four different process parameters were considered for this study power rating of the machine, static load, slurry concentration and abrasive...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Afyon Kocatepe University Journal of Sciences and Engineering
سال: 2015
ISSN: 2147-5296,2149-3367
DOI: 10.5578/fmbd.10586