Determination of nitrogen, phosphorus and anionic surfactant in water by flow injection analysis.
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Drag Reduction by Anionic Surfactant Solutions in Gravity Driven Flow System
This paper presents efflux time experiments performed in the absence and presence of aqueous solutions of Drag Reducing Agents (DRAs) when a liquid is emptied from a large open cylindrical storage tank through an exit piping system. The drag reducing agents studied are Dodecyl benzene sulfonate anionic surfactant and a mixed solution of surfactant and sodium chloride counter ion. The variab...
متن کاملSpectrophotometric Determination of Anionic Surfactant Based on Ion-pair Formation with Methylene Blue in Reversed Flow Injection Mode
A simple reversed flow injection system with minimal consumption of organic solvent has been developed for the spectrophotometric determination of anionic surfactant (AS) in water samples. The method is based on the ion-pair formation between anionic surfactant and Methylene Blue (MB) and its extraction to chloroform. Sodium dodecyl sulfate (SDS) is used as a model anionic surfactant. The sampl...
متن کاملFlow injection analysis of iron in rain water with thiocyanate and surfactant
This paper explains a new procedure for flow injection analysis (FIA) determination of iron in rain water based on the colour reaction of Fe(3+) with thiocyanate ions in the presence of the cationic surfactant cetylpyridinium chloride (CPC). The value of apparent molar absorptivity of the complex in terms of iron is (2.00) x 10(4) l mole(-1) cm(-1) at an absorption maximum of 490 nm. The detect...
متن کاملUltra-trace Determination of Palladium(II) by Spectrophotometric Flow Injection Analysis
Nowadays, palladium compounds due to their especial characteristics used in different industries, mainly in electrical power sources and chemical productions as a catalyst. Therefore, Pd concentration is increasing in our around that can be contaminant our environment due its toxic effects. In this work, a simple, selective and rapid flow injection method of analysis (FIA) has been developed fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Environmental Conservation Engineering
سال: 1986
ISSN: 1882-8590,0388-9459
DOI: 10.5956/jriet.15.525