Determination of Micro Trace Oxygen in High Purity Iron with the Inert Gas Fusion Method
نویسندگان
چکیده
منابع مشابه
Quantitative analysis of trace bulk oxygen in silicon wafers using an inert gas fusion method.
This paper describes a method for removing oxide film from the surface of silicon wafers using an inert gas fusion impulse furnace and precise determination of bulk oxygen within the wafer. A silicon wafer was cut to about 0.35 g (6 x 13 x 2 mm) and dropped into a graphite crucible. The sample was then heated for 40 s at 1300 degrees C. The wafer's oxide film was reduced by carbon and removed a...
متن کاملDetermination of permeability and diffusivity of oxygen in polymers by polarographic method with inert gas
A modified polarographic method with inert gas for determination of the oxygen permeability in polymers immersed in liquids is described. Owing to the stream of an inert gas towards polymer from the cathode side, lateral oxygen diffusion (edge effects) is minimized. Unlike the standard Fatt method, the method with inert gas is suitable also for thick samples and, therefore, for high-permeable m...
متن کاملDetermination of oxygen content in magnesium and its alloys by inert gas fusion-infrared absorptiometry.
A method for the determination of the oxygen content in magnesium and magnesium alloys has been developed. Inert gas fusion-infrared absorptiometry was modified by introducing a multistep heating process; a sample containing oxygen is fused with tin to form an eutectic mixture at 900°C in a graphite crucible, followed by a subsequent gradual temperature increase of up to 2000°C, which enables t...
متن کاملDetermination of Trace Anions in High Purity Waters by High Volume/Direct Injection Ion Chromatography
INTRODUCTION There has been considerable interest in the determination of anions at trace levels by IC. For example, the Electric Power Research Institute (EPRI) has established IC as the analytical technique for determining sodium, chloride, and sulfate down to 0.25 μg/L (ppb) in power plant waters. For high-purity water used in semiconductor processing, the Semiconductor Equipment and Materia...
متن کاملdetermination of maximal singularity free zones in the workspace of parallel manipulator
due to the limiting workspace of parallel manipulator and regarding to finding the trajectory planning of singularity free at workspace is difficult, so finding a best solution that can develop a technique to determine the singularity-free zones in the workspace of parallel manipulators is highly important. in this thesis a simple and new technique are presented to determine the maximal singula...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1992
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.78.5_774