منابع مشابه
Case Study: Fermentation of frozen whole-plant corn silage and high-moisture corn after thawing
The study objectives were to evaluate (1) the effect of thawing unfermented whole-plant corn (WPC; Exp. 1) on fermentation capacity after several months of frozen storage, and (2) the effect of temperature on fermentation profile of thawed high-moisture corn (HMC; Exp. 2) stored frozen for a longer period and then fermented at 2 ambient temperatures. Unfermented WPC and HMC samples were obtaine...
متن کاملThe 2009 Wisconsin Corn Crop High Moisture Corn, Aerobic Stability, Feed Additives and Mycotoxins Common Questions
Record low growing degree days and suboptimal growing conditions for corn in 2009 significantly delayed corn dry down and harvest in much of Wisconsin. As a result, near optimal environmental conditions (frost before full maturity) were present in the fall of 2009 for field mold growth. Field molds indentified on corn in the fall of 2009 by the University of Wisconsin Department of Plant Pathol...
متن کاملFinite Element Simulation of Corn Moisture Adsorption
Thin-layer moisture adsorption tests were conducted by exposing com kernels to different air relative humidities (RH of 75, 80, and 90%) and temperatures (25, 30, 35, and 40°C). A two-dimensional finite element model was developed to simulate moisture diffusion into a com kernel during adsorption. The finite element model satisfactorily predicted experimental moisture ratio of corn samples and ...
متن کاملCorn Moisture Measurement using a Capacitive Sensor
Corn moisture content is the main factor of effecting corn safe transportation and storage, and is also an indispensable measurement part when it is used to feed, food and industry. Due to large particle size, corn will produce large gap during measuring moisture content. Because air has much influence on dielectric constant of the device, moisture content is not precision. In all kinds of corn...
متن کاملMoisture and Bio-Deterioration Risk of Building Materials and Structures
During the service life of buildings, natural aging and eventual damage of materials due to different chemical, physical, and biological processes can take place. Ageing of the materials is one aspect of the environmental processes and involve different chemical, mechanical and biological reactions of the materials. Bio-deterioration, e.g. mould, decay and insect damage in buildings, is caused ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Microbiology
سال: 1975
ISSN: 0003-6919
DOI: 10.1128/am.30.1.103-109.1975