Detailed Modeling of Flat Plate Solar Collector with Vacuum Glazing
نویسندگان
چکیده
منابع مشابه
Modeling of Flat-Plate Solar Collector Operation in Transient States
Saleh, Ahmad M. M.S.E., Purdue University, May 2012. Modeling Of Flat-Plate Solar Collector Operation in Transient States. Major Professor: Hosni Abu-Mulaweh. Solar energy is becoming an alternative for the limited fossil fuel resources. One of the simplest and most direct applications of this energy is the conversion of solar radiation into heat, which can be used in water heating systems. A c...
متن کاملexergy analysis of a flat plate solar collector in combination with heat pipe
the use of solar collectors in combination with heat pipes is rapidly growing in recent years.heat pipes, as heat transfer components, have undeniable advantages in comparison with other alternatives. the most important advantage is their high rate of heat transfer at minor temperature differences. although there have been numerous studies on the heat analysis or first thermodynamic analysis of...
متن کاملTheoretical Model of a Flat Plate Solar Collector Integrated with Phase Change Material
Abstract—The objective of this work was to develop a theoretical model to study the dynamic thermal behavior of a flat plate solar collector integrated with a phase change material (PCM). The PCM acted as a heat source for the solar system during low intensity solar radiation and night. The energy balance equations for the various components of the collector as well as for the PCM were formulat...
متن کاملDesign and Development of Compound Parabolic Concentrating Solar Collector with Flat Plate Absorber
In this research work 2-D CPC (Compound Parabolic Concentrator) with flat plate absorber and two parabolic reflectors is first designed and then fabricated for thermal performance analysis. Here the incident rays, after reflection from the reflector, are not focused at a point but are simply collected on a line of absorber surface. Acrylic sheets are provided to reduce the heat loss. Flat plate...
متن کاملSensitivity Analysis of the Test Parameters of a Solar Flat Plate Collector for Performance Studies
The BIS test procedure for performance of solar flat plate collectors allows a certain limit of deviation for the control parameters to define the steady state condition. During actual performance studies, sometimes these limits are exceeded. In this paper an attempt has been made to find out the effect on the performance curve of the collector as a result of exceeding this prescribed limit by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Photoenergy
سال: 2017
ISSN: 1110-662X,1687-529X
DOI: 10.1155/2017/1587592