DETAILED FINITE ELEMENT ANALYSIS OF COMPOSITE BEAM UNDER CYCLIC LOADS
نویسندگان
چکیده
منابع مشابه
Analysis of a Beam under Moving Loads
Abstract: It is assumed that a beam made of material has a physical nonlinear behavior. This beam is analyzed under the moving concentrated and distributed continuous loads. The vibration equations of motion are derived from the Hamilton's Principle and Euler–Lagrange Equation. In this study, the amplitude of vibration, circular frequency, bending moment, stress and deflection of the beam has b...
متن کاملShape optimization of reduced beam section under cyclic loads
Optimal shapes are found for reduced beam section of a cantilever H-beam subjected to forced cyclic displacement at the free end. The beam is discretized to finite elements, and a commercial software package called ABAQUS is used for elastoplastic analysis. The numerical results are first compared with experimental results to verify the accuracy. The objective function to be maximized is the di...
متن کاملFinite Element Delamination Study of a Notched Composite Plate under Flexural Loads - André Nilsson Asp
The delamination process in notched composite plates under flexural loading has been investigated using finite element analysis. Cohesive elements implemented in the commercial finite element package ABAQUS have been used in the region around the drilled-hole, and positioned between layers where delamination was observed during experiments presented in an accompanying paper. The delamination in...
متن کاملAnalysis of Complex Composite Beam by Using Timoshenko Beam Theory & Finite Element Method
Fiber-reinforced composites, due to their high specific strength, and stiffness, which can be tailored depending on the design requirement, are fast replacing the traditional metallic structures in the weight sensitive aerospace and aircraft industries. An analysis Timoshenko beam theory for complex composite beams is presented. Composite materials have considerable potential for wide use in ai...
متن کاملFinite element method modelling of the properties of a Cu–SiC composite under cyclic loading conditions
The paper reports on finite element method (FEM) analysis of Cu–SiC composites behaviour under cyclic loading conditions. In order to emphasise the influence of materials description on following results, there were two hardening rules used to describe the plastic behaviour of the matrix: (a) simple isotropic and (b) combined isotropic-kinematic. Reinforcing ceramics was assumed to be perfectly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2014
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.79.1481