Destruction investigation of foundry sand-liquid-glass cores under compression

Recycling of iron foundry sand and glass waste as raw material for production of whiteware.

The purpose of this study was to evaluate the production feasibility of triaxial whiteware using sand from cast iron moulds as a raw material instead of silica, and recycled glass in place of feldspar. Formulations were prepared using sand, glass waste, and white-firing clay such that only 50% of the composition was virgin material (clay). The ceramic bodies were formed by pressing and fired at...

Geoenvironmental behavior of foundry sand amended mixtures for highway subbases.

The high cost of landfilling and the potential uses of waste foundry sands have prompted research into their beneficial reuse. Roadways have a high potential for large volume usage of the foundry sands. A laboratory testing program was conducted on soil-foundry sand mixtures amended with cement and lime to assess their applicability as highway subbase materials. The mixtures were compacted in t...

User Guideline for Foundry Sand in Green Infrastructure Construction

Investigation of Mass Transfer Coefficient under Jetting Conditions in a Liquid-Liquid Extraction System

In this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-Butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. The effects of various parameters such as jet velocity, nozzle diameter and the heig...

Numerical Investigation of the Influence of Sand Particle Concentration on Long Radius Elbow Erosion for Liquid-Solid Flow

Erosion caused by sand transportation in flow changing devices is a serious concern in the hydrocarbon and mineral processing industry, which entail to failure and malfunction of flow devices. In this study, computational fluid dynamics (CFD) with discrete phase models (DPM) were employed for analysis of carbon steel long radius 90-Degree elbow erosion due to the sand concentration of 2, 5 and ...