Designing NSM FRP systems in concrete using partial safety factors

Understanding and Assessment of Debonding Failures in FRP-Concrete Systems

Failures in FRP-strengthened reinforced concrete (RC) members may occur by flexural failures of critical sections or by debonding of FRP plate from the RC beams. Debonding in the FRP/adhesive/concrete interface region may cause a significant decrease in member capacity leading to a premature failure of the system. There is a need for improved knowledge of the debonding processes under mechanica...

Concrete Open-Wall Systems Wrapped with FRP under Torsional Loads

The static behavior of reinforced concrete (RC) beams plated with layers of fiber-reinforced composite material (FRP) is widely investigated in current literature, which deals with both its numerical modeling as well as experiments. Scientific interest in this topic is explained by the increasing widespread use of composite materials in retrofitting techniques, as well as the consolidation and ...

FRP Dowels for Concrete Pavements

A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...

Decision Support Tools for Concrete Infrastructure Rehabilitation (using FRP composites)

FRP Shear Reinforcement for Concrete Structures