DESIGNING A ROUTER REDUCTION SYSTEM USING HOT STANDBY ROUTER PROTOCOL METHOD FOR BACKUP LINK IN DITJEN PPKL

Cisco Hot Standby Router Protocol (HSRP)

Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. This document reflects an existing deployed protocol. The IETF does have a working group which is in the process of producing a standards track protocol to address the same issues. Abstract The memo specifies the Hot Standby...

A Dynamic Link Allocation Router

The connection oriented flow control method is subject to a high retry rate with the heavy network load. An asynchronous link induces an extra latency when its bandwidth is directly enlarged by increasing the wire count. In this paper, a new dynamic link allocation flow control method is proposed. By dynamically allocating the sub-links on a link to multiple frames, it decreases the retry rate ...

Reconfigurable Router Modules Using Network Protocol Wrappers

The ongoing increases of line speed in the Internet backbone combined with the need for increased functionality of network devices presents a major challenge for designers of Internet routers. These demands call for the use of reprogrammable hardware to provide the required performance and functionality at all network layers. The Field Programmable Port Extender (FPX) provides such an environme...

Router 2 Router 1 Router 3 Workstation Pings Router 2 Router 1 Router 3 Workstation

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as refer...

Time-Varying Network Tomography: Router Link Data