Design Rules for Solar Cells with Plated Metallization
نویسندگان
چکیده
منابع مشابه
How to Design Optimal Metallization Patterns for Solar Cells
Solar cells have a metallization pattern to collect the current. Generally, simple metallization patterns, such as the H-grid metallization pattern, a cross-hatched pattern or a full metallization, are used. With the widely used technique of screen printing, however, virtually any metallization pattern of any topology can be realized, but the problem is how to design the optimum topology. The p...
متن کاملDesign Rules and Scaling for Solar Sails
Useful design rules and simple scaling models have been developed for solar sails. Chief among the conclusions are 1. Sail distortions contribute to the thrust and moments primarily though the mean squared value of their derivatives (slopes), and the sail behaves like a flat sheet if the value is small. The RMS slope is therefore an important figure of merit, and sail distortion effects on the ...
متن کاملData mining with molecular design rules identifies new class of dyes for dye-sensitised solar cells.
A major deficit in suitable dyes is stifling progress in the dye-sensitised solar cell (DSC) industry. Materials discovery strategies have afforded numerous new dyes; yet, corresponding solution-based DSC device performance has little improved upon 11% efficiency, achieved using the N719 dye over two decades ago. Research on these dyes has nevertheless revealed relationships between the molecul...
متن کاملHighly Efficient Multi-busbar Solar Cells with Ag Nano-particle Front Side Metallization
The main target for a commercially successful solar cell production is to decrease the cost/Watt-peak ratio. In the last years new techniques like fine line screen printing or plating of the front electrode entered the market. These new techniques enable a reduction of Ag or Ag containing paste of the front grid or even a substitution of this metal. Cu is a suited candidate because of its high ...
متن کاملElectroless Nickel Deposition for Front Side Metallization of Silicon Solar Cells
In this work, nickel thin films were deposited on texture silicon by electroless plated deposition. The electroless-deposited Ni layers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and sheet resistance measurement. The results indicate that the dominant phase was Ni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2015
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2015.03.291