Design rules for p-i-n diode carriers sweeping in nano-rib waveguides on SOI

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design Rules for a Nano-Opto-Mechanical Actuator Based on Suspended Slot Waveguides

In this paper, physical modeling including optical and Casimir forces is adopted in order to analyze a nano-opto-mechanical actuator based on silicon-on-insulator suspended slot waveguides. Numerical simulations based on the finite element method and systematic design rules are presented. Moreover, parametric investigations on slot waveguide sizes and optical properties are presented, and their...

متن کامل

Design considerations for devices based upon small SOI waveguides

H r Discussion: Figure 1 shows a schematic of a typical rib waveguide, as well as the commonly utilised labels for rib width (W), etch depth (D), guiding layer height (H), and slab height (r). For large rib waveguides, Soref et al [1], and Pogossian et al [2], have defined geometric design rules for the waveguide to behave as a single mode device. These designs rules can be summarised by equati...

متن کامل

P-n Junction Diode

Chemist, led the research for the molecular diode (In the semiconductor industry, called p-n junctions)

متن کامل

Characterization of an Mg-implanted GaN p-i-n Diode

A p-i-n diode formed by the implantation of Mg in GaN was fabricated and characterized. After implantation, Mg was activated using the symmetrical multicycle rapid thermal annealing technique with heating pulses up to 1340C. The Mg-implanted p-i-n diode exhibits rectification and low leakage currents. The realization of an Mg-implanted GaN device is a key step for future power electronic devices.

متن کامل

Analysis of Optical Coupling for SOI Waveguides

Optical coupling loss and alignment tolerance between SOI waveguides and laser diodes were investigated. It was found that the minimum optical coupling loss was about 1.6 dB and alignment tolerance was about ±0.7 μm. An optical input/output interface for optical fibers was also proposed and investigated the coupling loss characteristics.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2011

ISSN: 1094-4087

DOI: 10.1364/oe.19.009915