Design optimization of a 64 mm-diameter electromagnetic 2D scanning micromirror
نویسندگان
چکیده
منابع مشابه
A surface-micromachined vertical scanning micromirror
A vertically supported, two-axial scanning micromirror with an optical reflection area of 600 μm × 600 μm has been successfully demonstrated using a 2 μm thick standard planar polysilicon surface micromachining process. The micromirror was lifted from the substrate and vertically supported by locking springs and hinges using a micromanipulator under a probe station. It was torsionally actuated ...
متن کاملMEMS scanning micromirror for optical coherence tomography.
This paper describes an endoscopic-inspired imaging system employing a micro-electromechanical system (MEMS) micromirror scanner to achieve beam scanning for optical coherence tomography (OCT) imaging. Miniaturization of a scanning mirror using MEMS technology can allow a fully functional imaging probe to be contained in a package sufficiently small for utilization in a working channel of a sta...
متن کاملOptimization and Discretization in 2D Problems of Electromagnetic Invisible Cloaking
We study control problems for the 2D electromagnetic field model describing scattering TM-polarized electromagnetic waves in unbounded homogeneous medium containing a penetrable inhomogeneous dielectric obstacle with the boundary partially coated for masking. These problems arise when developing the design technologies of electromagnetic cloaking devices using optimization method. Two constitut...
متن کاملDesign and Simulation of a 2GHz, 64×64 bit Arithmetic Logic Unit in 130nm CMOS Technology
The purpose of this paper is to design a 64×64 bit low power, low delay and high speed Arithmetic Logic Unit (ALU). Arithmetic Logic Unit performs arithmetic operation like addition, multiplication. Adders play important role in ALU. For designing adder, the combination of carry lookahead adder and carry select adder, also add-one circuit have been used to achieve high speed and low area. In mu...
متن کاملOptical design and imaging performance testing of a 9.6-mm diameter femtosecond laser microsurgery probe.
We present the optical design of a 9.6-mm diameter fiber-coupled probe for combined femtosecond laser microsurgery and nonlinear optical imaging. Towards enabling clinical use, we successfully reduced the dimensions of our earlier 18-mm microsurgery probe by half, while improving optical performance. We use analytical and computational models to optimize the miniaturized lens system for off-axi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2020
ISSN: 1094-4087
DOI: 10.1364/oe.395903