Design optimisation of reinforced concrete pile foundation using generalised reduced gradient algorithm
نویسندگان
چکیده
Purpose The purpose of this study is to find the optimum design Reinforced Concrete (RC) pile foundation enable efficient use structural concrete with greater consequences for global environment and economy. Design/methodology/approach A non-linear optimisation technique based on Generalised Reduced Gradient (GRG) algorithm was implemented minimum cost RC in frictional soil. This achieved by obtaining satisfying serviceability ultimate limit state requirements BS 8004 EC 7. formulated procedure applied a case project assess efficiency proposed formulation. Findings results prove that GRG method Excel solver an active, fast, accurate computer programme obtain design. application shows up 26% reduction compared conventional Research limitations/implications formulation constraints will be limited provisions Practical implications Since quantity attained through optimisation, then cement used thus result CO 2 emission. Therefore, structures vital solution damage Earth's climate physical resulting from high carbon emissions. Originality/value current considers incorporation different soil ground parameters process rather than assuming any capacity value process.
منابع مشابه
OPTIMUM DESIGN OF REINFORCED CONCRETE FRAMES USING BAT META-HEURISTIC ALGORITHM
The main aim of the present study is to achieve optimum design of reinforced concrete (RC) plane moment frames using bat algorithm (BA) which is a newly developed meta-heuristic optimization algorithm based on the echolocation behaviour of bats. The objective function is the total cost of the frame and the design constraints are checked during the optimization process based on ACI 318-08 code. ...
متن کاملOPTIMUM COST DESIGN OF REINFORCED CONCRETE SLABS USING CUCKOO SEARCH OPTIMIZATION ALGORITHM
This paper presents a Cuckoo Optimization Algorithm (COA) model for the cost optimization of the one-way and two-way reinforced concrete (RC) slabs according to ACI code. The objective function is the total cost of the slabs including the cost of the concrete and that of the reinforcing steel. In this paper, One-way and two-way slabs with various end conditions are formulated as ACI code. The t...
متن کاملDriven Concrete Pile Foundation Monitoring With Embedded Data Collector System
Florida Department of Transportation (FDOT) sponsored research performed at the University of Florida resulted in developing a wireless monitoring and real time static capacity estimate technology for driven piles. This new technology, Embedded Data Collector (EDC), uses two levels of instrumentation, embedded in the body of precast prestressed concrete piles near the head and tip. Strain and a...
متن کاملoptimal design of reinforced concrete frames using big bang-big crunch algorithm
in this paper a discrete big bang-big crunch algorithm is applied to optimal design of reinforced concrete planar frames under the gravity and lateral loads. optimization is based on aci 318-08 code. columns are assumed to resist axial loads and bending moments, while beams resist only bending moments. second-order effects are also considered for the compression members, and columns are checked...
متن کاملoptimum cost design of reinforced concrete slabs using cuckoo search optimization algorithm
this paper presents a cuckoo optimization algorithm (coa) model for the cost optimization of the one-way and two-way reinforced concrete (rc) slabs according to aci code. the objective function is the total cost of the slabs including the cost of the concrete and that of the reinforcing steel. in this paper, one-way and two-way slabs with various end conditions are formulated as aci code. the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in engineering and built environment
سال: 2022
ISSN: ['2634-2502', '2634-2499']
DOI: https://doi.org/10.1108/febe-12-2021-0059