Design of X-Concentric Braced Steel Frame Systems Using an Equivalent Stiffness in a Modal Elastic Analysis
نویسندگان
چکیده
In this work, a general method for the design of concentric braced steel frames (CBF) with active tension diagonal bracings, applicable to single- and multi-storey structures, is presented. The based on use an elastic modal analysis response spectrum, which carried out using appropriate modified stiffness bracings. reliability proposed validated through significant case studies, making series numerical comparisons carrying time-history non-linear dynamic analysis.
منابع مشابه
Effect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملCost Optimization of Concentric Braced Steel Building Structures
Seismic design may require non-conventional concept, due to the fact that the stiffness and layout of the structure have a great effect on the overall structural behaviour, on the seismic load intensity as well as on the internal force distribution. To find an economical and optimal structural configuration the key issue is the optimal design of the lateral load resisting system. This paper foc...
متن کاملOPTIMAL SENSOR PLACEMENT FOR MODAL IDENTIFICATION OF A STRAP-BRACED COLD FORMED STEEL FRAME BASED ON IMPROVED GENETIC ALGORITHM
This paper is concerned with the determination of optimal sensor locations for structural modal identification in a strap-braced cold formed steel frame based on an improved genetic algorithm (IGA). Six different optimal sensor placement performance indices have been taken as the fitness functions two based on modal assurance criterion (MAC), two based on maximization of the determinant of a Fi...
متن کاملAnalysis and Design of Steel-Concrete Composite Frame Systems
The lack of clear guidance regarding the value of elastic flexural rigidity (EI) that should be used in the analysis of steel-concrete composite columns is a significant unresolved issue that hinders the design of frame systems that include these members. The common approach of utilizing the rigidity of either the steel or the concrete only tends to be overly conservative. Other approaches that...
متن کاملComparative Review of the Performance Based Design of Building Structures Using Static Non-Linear Analysis, Part A: Steel Braced Frames
The objective of this review to be submitted in two independent parts, for steel frames and for RC frames, is to compare their structural performance with respect to the proposed N2-method, and so also of the consequent convenience of using pushover methodology for the seismic analysis of these structures. A preliminary investigation is presented on a pushover analysis used for the seismic perf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Buildings
سال: 2022
ISSN: ['2075-5309']
DOI: https://doi.org/10.3390/buildings12030359