Design of Non-Prismatic RC Beams Using Strut-And-Tie Models
نویسندگان
چکیده
منابع مشابه
Strut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملa simple strut-and-tie model for prediction of ultimate shear strength of rc deep beams
in this paper a new method based on strut-and-tie model (stm) is proposed to determine the shear capacity of simply supported rc deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. it is assumed that, the total carried shear force by rc deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism ...
متن کاملEvaluation of Shear Strength of SFRC Moderate Deep Beams Using Strut-and-Tie Models
Strut-and-tie is a system of forces' distribution in the form of "load-path" connectivity from the applied load point to the support point. Strut-and-Tie Method (STM) has been developed based on simple truss model. STM models represent the load carrying mechanism of a structural member by approximating the flow of internal forces by means of struts representing the flow of compressive stresses ...
متن کاملPrediction of Shear Strength of PPFRC Moderate Deep Beams Using Strut-and-Tie Models
Strut-and-tie is a system of forces' distribution in the form of "load-path" connectivity from the applied load point to the support point. Strut-and-Tie Method (STM) has been developed based on simple truss model. STM models represent the load carrying mechanism of a structural member by approximating the flow of internal forces by means of struts representing the flow of compressive stresses ...
متن کاملLoad Transfer Mechanism Based Unified Strut-and-Tie Modeling for Design of Concrete Beams
Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as the basic tools, is conceptually simple, but its realization for complex concrete structure is not straightforward and depends on flow of internal forces in the structure. STM technique has won wide acceptance for deep member and shear design. STM technique is a unified approach that considers all ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Concrete Technology
سال: 2004
ISSN: 1346-8014,1347-3913
DOI: 10.3151/jact.2.249