Design of miniature directional coupler with wide bandwidth
نویسندگان
چکیده
منابع مشابه
Highly directional emission from photonic crystals with a wide bandwidth
The authors numerically and experimentally demonstrated highly directional emission from photonic crystals. This was achieved by first splitting the incident electromagnetic wave into multiple beams using photonic crystal waveguide structures. The beams were then emitted out of the surface of a photonic crystal with the same phase, which resulted in a highly directional radiation pattern. The m...
متن کاملThe Design of half-subtractor Logic Function Based on Nonlinear Directional Coupler
In this paper a novel design of all-optical half-subtractor based on nonlinear directional coupler is proposed. By using four waveguides and appropriately adjusting the refractive indices and selecting the proper length of waveguides, halfsubtractor function can be obtained. The operation of this function is simulated by RSoft CAD-Layout (BeamPROP) simulator. The simulation results confirm the ...
متن کاملAnalysis and Design of an Ultra Wideband Directional Coupler
Abstract—In this paper, a novel wideband directional coupler using coplanar waveguide multilayer slot-coupled technique is presented and implemented. The coupler uses two coplanar waveguide lines etched on two layers and coupled through an hexagonal slot etched on the common ground plane located between these layers. Firstly, conformal mapping techniques were used to obtain analytic closed-form...
متن کاملDesign of a Liquid Crystal Tunable Directional Coupler
The accurate analysis of optical waveguides is an important issue when designing devices for optical communication purposes. Different numerical approaches exist for modeling waveguide structures and one of the most important issues is the calculation of the guided modes of the waveguide. Commercial programs are widely available for the analysis of isotropic waveguides or waveguides with a redu...
متن کاملDesign and manufacture of a directional coupler in LTCC
In this work, the design and fabrication process of a stripline 90 degree hybrid coupler using LTCC technology are presented. The main specifications required for the device developed were 1.03 GHz central operation frequency, isolation higher than 23dB and a maximum size of 15 mm x 10 mm. To obtain a starting point of physical parameters for the simplified DC configuration a transmission lines...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2021
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/1730/1/012102