Design of Low Cost Self-Navigation Rover Based on IOT
نویسندگان
چکیده
منابع مشابه
Low Computation Vision-Based Navigation for a Martian Rover
In the design and construction of mobile robots vision has always been one of the most potentially useful sensory systems. In practice however, it has also become the most difficult to successfully implement. At the MIT Mobile Robotics (Mobot) Lab we have designed a small, light, cheap, and low power Mobot Vision System that can be used to guide a mobile robot in a constrained environment. The ...
متن کاملA Pedestrian Navigation System Based on Low Cost IMU
For indoor pedestrian navigation with a shoe-mounted inertial measurement unit (IMU), the zero velocity update (ZUPT) technique is implemented to constrain the sensors’ error. ZUPT uses the fact that a stance phase appears in each step at zero velocity to correct IMU errors periodically. This paper introduces three main contributions we have achieved based on ZUPT. Since correct stance phase de...
متن کاملLow-cost Autonomous Navigation System Based on Optical Flow Classification
This work presents a low-cost robot, controlled by a Raspberry Pi, whose navigation system is based on vision. The strategy used consisted of identifying obstacles via optical flow pattern recognition. Its estimation was done using the Lucas-Kanade algorithm, which can be executed by the Raspberry Pi without harming its performance. Finally, an SVM-based classifier was used to identify patterns...
متن کاملNavigation Approach For Lunar Rover Based On Slip Prediction
This paper presented a method for navigation of lunar rover. This method used the real lunar data to model the virtual terrain. In addition, this method not onle considers uncertainty of sensor data, and does integrate directional slip prediction into the path planning algorithm resolving the issue of emerging higher-level behaviors such as planning a path with switch-backs up a slope. Simulati...
متن کاملVEHIOT: Design and Evaluation of an IoT Architecture Based on Low-Cost Devices to Be Embedded in Production Vehicles
Nowadays, the current vehicles are incorporating control systems in order to improve their stability and handling. These control systems need to know the vehicle dynamics through the variables (lateral acceleration, roll rate, roll angle, sideslip angle, etc.) that are obtained or estimated from sensors. For this goal, it is necessary to mount on vehicles not only low-cost sensors, but also low...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Robotics & Automation
سال: 2018
ISSN: 2168-9695
DOI: 10.4172/2168-9695.1000187