Design of Fault Diagnosis Method for Centrifugal Compressor Actuator
نویسندگان
چکیده
منابع مشابه
Actuator Fault Detection and Diagnosis for Quadrotors
This paper presents a method for fault detection and diagnosis of actuator loss of effectiveness for a quadrotor helicopter. This paper not only considers the detection of the actuator loss of effectiveness faults, but also addresses the diagnosis of the faults. The detection and estimation of the faults are performed by the Augmented Extended Kalman Filter. The faults are modelled as random wa...
متن کاملconceptual design of a centrifugal compressor impeller for a 65 kw micro gas turbine
the aim of this study is designing the impeller of a centrifugal compressor in order to supply pressure ratio for a 65 kw micro gas turbine. first, the primary thermodynamic analysis has been conducted for the considered cycle using a home made code. herein, the compressor pressure ratio was considered to be 4. the obtained thermal efficiency was 25.64%. then, the design of micro compressor in ...
متن کاملDesign, Analysis and Fabrication of a Meso-scale Centrifugal Compressor
A gas or vapor compressor is one of the key components of many engineering systems, such as certain designs of vapor compression refrigeration systems, cryo-coolers, air handlers. For meso-scale systems with linear dimensions of a few centimeters, conventional designs do not work efficiently because of rather large relative tolerances, and hence these meso-scale systems require micro-fabricated...
متن کاملCFD Analysis of Off-design Centrifugal Compressor Operation and Performance
This paper presents some of the results from a Master’s thesis research into the performance and operation of a centrifugal compressor at off-design operating conditions using advanced computational fluid dynamics (CFD) techniques. ANSYS CFX is the CFD solver used in this blind study to evaluate the ability of modern CFD software to predict the performance of centrifugal compressors operating a...
متن کاملOptimal Design of a Centrifugal Compressor Impeller Using Evolutionary Algorithms
An optimization study was conducted on a centrifugal compressor. Eight design variables were chosen from the control points for the Bezier curves which widely influenced the geometric variation; four design variables were selected to optimize the flow passage between the hub and the shroud, and other four design variables were used to improve the performance of the impeller blade. As an optimiz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modeling and Simulation
سال: 2017
ISSN: 2324-8696,2324-870X
DOI: 10.12677/mos.2017.62008