Design of Artificial Metamaterial Absorber Based on Stacking Method
نویسندگان
چکیده
A millimeter-sized artificial periodic structure material is successfully simulated, showing the characteristics of a thin geometric scale, broadband response, and high wave absorption. The structural units are stacked with metal circles, notched circular rings, dielectric material. design similar to quasi-two-dimensional planar maintains while reducing number layers in stack. In addition, electromagnetic model this microstructure established study its S-parameters suction properties through simulations. Numerical results reveal that when incident vertically, absorption over 90% frequency range 14.4-14.8 GHz 15.4-20.6 GHz. absorber features same for different polarization states.
منابع مشابه
Dual band metamaterial perfect absorber based on artificial dielectric “molecules”
Dual band metamaterial perfect absorbers with two absorption bands are highly desirable because of their potential application areas such as detectors, transceiver system, and spectroscopic imagers. However, most of these dual band metamaterial absorbers proposed were based on resonances of metal patterns. Here, we numerically and experimentally demonstrate a dual band metamaterial perfect abso...
متن کاملA Broadband Flexible Metamaterial Absorber Based on Double Resonance
We present a broadband microwave metamaterial (MM) absorber, the unit cell of which consists of a lumped-resistor-loaded electric-inductive-capacitive (ELC) resonator and a cut-wire on the same side of a flexible polyimide substrate. In contrast to the common MM absorber, the metallic pattern layer of the proposed structure is placed parallel to the direction of propagation of the incident wave...
متن کاملInfrared perfect absorber based on nanowire metamaterial cavities.
An infrared perfect absorber based on a gold nanowire metamaterial cavities array on a gold ground plane is designed. The metamaterial made of gold nanowires embedded in an alumina host exhibits an effective permittivity with strong anisotropy, which supports cavity resonant modes of both electric dipole and magnetic dipole. The impedance of the cavity modes matches the incident plane wave in f...
متن کاملAn Omnidirectional Polarization Detector Based on a Metamaterial Absorber
The theory, design, simulation, fabrication, and performance of an omnidirectional polarization detector (PD) with two resonances located in the X and Ka ranges based on a metamaterial absorber (MMA) are presented in this paper. The sandwich structure of PD is composed of 0.1 μm periodic "I" shaped patches on the metasurface, a dielectric of 200 μm FR-4 on the interlayer, and a 0.3 μm copper fi...
متن کاملBroadband terahertz metamaterial absorber based on sectional asymmetric structures
We suggest and demonstrate the concept and design of sectional asymmetric structures which can manipulate the metamaterial absorber's working bandwidth with maintaining the other inherent advantages. As an example, a broadband terahertz perfect absorber is designed to confirm its effectiveness. The absorber's each cell integrates four sectional asymmetric rings, and the entire structure compose...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rf and Microwave Computer-aided Engineering
سال: 2023
ISSN: ['1099-047X', '1096-4290']
DOI: https://doi.org/10.1155/2023/4551248