Design of an Edge-Coupled Dual-Ring Split-Ring Resonator
نویسندگان
چکیده
منابع مشابه
Multi-gap individual and coupled split-ring resonator structures.
We present a systematic numerical study, validated by accompanied experimental data, of individual and coupled split ring resonators (SRRs) of a single rectangular ring with one, two and four gaps. We discuss the behavior of the magnetic resonance frequency, the magnetic field and the currents in the SRRs, as one goes from a single SRR to strongly interacting SRR pairs in the SRR plane. We show...
متن کاملDesign of Multiband PIFA loaded with Split Ring Resonator
In this paper, a multiband planar inverted-F antenna (PIFA) with high gain and appreciable bandwidth at the resonant frequencies is designed using metamaterial concept. The proposed PIFA without metamaterial is designed to resonate at 7.46 GHz with return loss of -23.71 dB and gain value 5.41 dBi. The designed antenna is having maximum possible bandwidth of 361.8 MHz. The proposed PIFA with spl...
متن کاملDesign of Hexagonal Split Ring Resonator using HFSS
In this paper, Hexagonal Split Ring Resonator (HSRR) and Square Split Ring Resonator (SSRR) are designed using HFSS simulation software. Both split ring resonators are based on the Metamaterial and same parameters. Then after compare the simulation result of HSRR and SSRR. HFSS simulation of the Hexagonal SRR shows improved Return Loss and VSWR i.e. -44.7 dB and 1 respectively compare to Square...
متن کاملImproved Split - Ring Resonator for Microfluidic Sensing
We present a method of making low loss split-ring resonators for microfluidic sensing at microwave frequencies using silver coated copper wire. We show that a simple geometric modification and the use of square cross-section wire give greater electric field confinement in the capacitive region of the resonant sensor. We use a combination of theoretical analysis, finite element simulations and e...
متن کاملImproving the Triple Coupled Ring-Resonator Performance as an Optical Filter
In this paper, a three ring-resonator serially coupled is considered as an optical filter. We are going to improve the performance of the designed optical filter by increasing the quality factor and finesse of filtered wavelengths. The first and last rings are coupled to the bus waveguides that carry the input and output fields. The effect of coupling parameters and ring radii on the filtering ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Antennas and Propagation Magazine
سال: 2011
ISSN: 1045-9243
DOI: 10.1109/map.2011.6097285