Design of an Adaptive Super-Twisting Control for the Cart-Pole Inverted Pendulum System
نویسندگان
چکیده
A cart-pole inverted pendulum system is one of the underactuated systems that has been used in many applications. This research aims to study design and effectiveness Adaptive Super-Twisting controller stabilize by comparing it with other previous control methods. stabilization upright using algorithm (ASTA), was investigated. The proposed designed based on decoupling method solve coupled input model. We then compared stabilizing first-order sliding mode (FOSMC) (STA) Matlab/Simulink simulation realistic computer simulation. developed anyKode Marilou software, which adopted Open-Dynamic Engine (ODE) as a physics engine. In simulation, we considered three different scenarios: nominal system, uncertainty, disturbed system. Meanwhile, only presented comparison controllers' performances for realized Both results showed controllers could 0.1 rad initial angular position around vertical axis. Under same conditions, ASTA STA had similar performances; they both have less chattering faster convergence than FOSMC approach. However, approach least energy delivered smallest errors two approaches.
منابع مشابه
Robust Adaptive Backstepping Control of Inverted Pendulum on Cart System
In this paper a design methodology for a novel robust adaptive backstepping controller for the stabilization control of an inverted pendulum on a movable cart, which is a benchmark control problem in the nonlinear control system paradigm, has been presented in a systematic manner. The proposed control law provides a systematic iterative formulation of a Lyapunov energy function for the inverted...
متن کاملDesign of Robust Energy Control for Cart - Inverted Pendulum
The objective is to design a complete control system for the Swing-up and Stabilizing Control of cart inverted pendulum. In particular, this work outlines the effectiveness of a particular Swing-up method based on feedback linearization and Total Energy Shaping (TES) considerations. The basic idea to solve the problem of driving the pendulum from down or any to upright position has been always ...
متن کاملNeural Network Control of an Inverted Pendulum on a Cart
The balancing of an inverted pendulum by moving a cart along a horizontal track is a classic problem in the area of control. This paper describes two Neural Network controllers to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. Both controllers are able to learn the demonstrated behavior which was swinging up and balancing t...
متن کاملRobust Control of an Inverted Pendulum on a Cart
This paper investigates the design and analysis of three controllers used to stabilize an inverted pendulum on a cart. This is accomplished by decomposing each control algorithm into two separate phases: swing-up control and stabilization control. A classical, H2, and H∞ design are each considered to stabilize a nominal linearized model of the inverted pendulum on a cart in the upward vertical ...
متن کاملFuzzy-logic control of an inverted pendulum on a cart
1 Purpose The purpose of this experiment is to apply controller and observer design techniques to a physical “difficult-to-control” system, namely, the inverted pendulum on a cart system. The controller will mainly be designed via optimal control techniques. The control objective is for the cart to track a square wave while the pendulum remains upright. Also, the controller must be improve the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JITEKI : Jurnal Ilmiah Teknik Elektro Komputer dan Informatika
سال: 2021
ISSN: ['2338-3062']
DOI: https://doi.org/10.26555/jiteki.v7i1.20420