DESIGN OF A HIGH BAND ISOLATION DIPLEXER FOR GPS AND WLAN SYSTEM USING MODIFIED STEPPED-IMPEDANCE RESONATORS
نویسندگان
چکیده
منابع مشابه
Wideband Tri-band Filter Design using Stepped-impedance Stub Resonators
This letter presents a wideband tri-passband filter in which tri-section stepped-impedance shunt-stubs are used as tri-mode resonators, connected by transmission lines. Developed from the topology of quarter-wavelength stub filters, these filters have much wider passbands compared to many other designs published. The stepped-impedance stubs also contribute transmission zeros between the passban...
متن کاملDesign of a Band-pass Filter Using Stepped Impedance Resonators with Floating Con- Ductors
A new type of miniaturized stepped impedance resonator (SIR) for bandpass filter applications is proposed in this paper. The new resonator incorporates a ground plane window with a floating conductor in the backside of the substrate. The ground plane window increase the characteristic impedance of the lines used to implement the inductive region of the quasi-lumped resonator, thus allowing some...
متن کاملNovel Super Compact Dual-Band Branch-Line Couplers Using Folded Stepped-Impedance Resonators for GSM and WLAN systems
Two novel compact BLCs were developed and proposed with compact size and improve the performance of dual-band branch-line couplers (BLCs). The developed model was reported to be a two-section stepped-impedance resonator which includes a highimpedance section accompanied by loaded double branches lines. The proposed model was shown to reduce the size of the dual-band BLC around 61% as well as a ...
متن کاملDesign of Defected Ground Band Pass Filters Using Stepped Impedance Resonators
In this paper, band-pass filters based on the microstrip configuration and utilizing coupled defected ground structures are presented. The 50 Ω microstrip line has a gap discontinuity in the middle and characterized by stepped impedance resonators on either half. The four fractal geometries tested for defected ground are the first and second iterations of the modified Moore curve, the closed st...
متن کاملDesign of High Gain, High Reverse Isolation and High Input Matched Narrowband LNA for GPS L1 Band Applications Using 0.18µm Technology
Design of Global Positioning System (GPS) receiver with a low noise amplifier (LNA) in the front end remains a major design requirement for the success of modern day navigation and communication system. Any LNA is expected to meet the requirements like its ability to add the least amount of noise while providing sufficient gain, perfect input and output matching, and high linearity. However, mo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research
سال: 2010
ISSN: 1559-8985
DOI: 10.2528/pier10060913