Design of a bandgap-engineered barrier-blocking HOT HgCdTe long-wavelength infrared avalanche photodiode

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modelling of High Quantum Efficiency Avalanche Photodiode

A model of a low noise high quantum efficiency n+np Germanium Photodiode utilizing ion implantation technique and subsequent drive-in diffusion in the n layer is presented. Numerical analysis is used to study the influence of junction depth and bulk concentration on the electric field profile and quantum efficiency. The performance of the device is theoretically treated especially at the wave-l...

متن کامل

Avalanche photodiode A User Guide

Introduction Avalanche photodiode detectors (APD) have and will continue to be used in many diverse applications such as laser range finders, data communications or photon correlation studies. This paper discusses APD structures, critical performance parameter and excess noise factor. For low-light detection in the 200to 1150-nm range, the designer has three basic detector choices the silicon P...

متن کامل

DESIGN AND PROPERTIES OF InGaAs/InGaAsP/InP AVALANCHE PHOTODIODE

An avalanche photodiode (APD) based on an InGaAs/InGaAsP/InP structure containing separated absorption, charge and multiplication layers (SACM) was designed, fabricated and tested. The InGaAsP charge layer at the heterointerface between the InGaAs absorption and InP multiplication region allows optimization of the electric field distribution and suppression of the carrier capture at the heteroi...

متن کامل

AlInAsSb/GaSb staircase avalanche photodiode

Articles you may be interested in Low-noise AlInAsSb avalanche photodiode Appl. Enhanced frequency response associated with negative photoconductance in an InGaAs/InAlAs avalanche photodetector Appl.

متن کامل

Characterization of a Geiger-mode Avalanche Photodiode

A 32 by 32 array of packaged 100 μm Geiger-mode avalanche photodiodes were tested and characterized. A breakdown voltage of 32 V was measured; at or just above this voltage is where the device should be biased in order to operate in Geiger-mode. The ideal region of the forward biased IV curve resulted in an ideality factor of 1.0 and no recombination/generation region. In addition, IDL code was...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2020

ISSN: 1094-4087

DOI: 10.1364/oe.408526