DESIGN OF A 10 TONS OVERHEAD CRANE WITH 21 METERS SPAN USING FINITE ELEMENT METHOD
نویسندگان
چکیده
A crane is a lifting equipment widely used to move cargo, construction sites, storage, and unload. The type of that commonly in industrial environments the overhead crane. functions as device. Besides that, it also works load transfer tool even though being moved limited an environment not too large (indoor) at PT. designed overcome problem moving material mold storage area due area's expansion addition 5-7 tons material. Therefore, proper design needed so can function properly. method uses VDI 2221 or Finite Element with Solid software. results structure obtained are double box girder girders dimensions p = 21 m, t 1224 mm, l 600 mm. deflection 13.75 runway steel profile I 400 x 200 8 13 value stem 5.6 wire rope 6 37, diameter 28 stress occurs 4306.1 Kg, less than maximum allowable tensile 8009.4 Kg. single hook 120 mm made S45C. on 0.88 result smaller 12.72 pulley 630 drum 604.9 length 279
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Anti-swing Fuzzy Controller Design for a 3D Overhead Crane
This paper proposes a simple but efficient technique to control 3D overhead crane. Load must track a desired path and not sway more than a reasonable range.The proposed method uses PID control for trolley to track the desired path and fuzzy control compensation to eliminate the load swing. Only the projection of swing angle is applied to design the fuzzy controller. No plant information of cran...
متن کاملAnti-swing Fuzzy Controller Design for a 3D Overhead Crane
This paper proposes a simple but efficient technique to control 3D overhead crane. Load must track a desired path and not sway more than a reasonable range.The proposed method uses PID control for trolley to track the desired path and fuzzy control compensation to eliminate the load swing. Only the projection of swing angle is applied to design the fuzzy controller. No plant information of cran...
متن کاملanti-swing fuzzy controller design for a 3d overhead crane
this paper proposes a simple but efficient technique to control 3d overhead crane. load musttrack a desired path and not sway more than a reasonable range.the proposed method uses pidcontrol for trolley to track the desired path and fuzzy control compensation to eliminate the loadswing. only the projection of swing angle is applied to design the fuzzy controller. no plantinformation of crane is...
متن کاملTransducer design simulation using finite element method
The fast development of computer power and computational algorithms has made it possible to design complex transducers and arrays using computer simulation. Practical examples are given here for transducer modeling using 3-D finite element method (FEM) instead of the traditional 1-D equivalent circuit models. The merits and deficiencies of the frequency domain and time domain FEM formulations w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Innovation in Mechanical Engineering and Advanced Materials
سال: 2023
ISSN: ['2477-5428', '2477-541X']
DOI: https://doi.org/10.22441/ijimeam.v4i3.18882