Design, modeling and parametric optimization of thermoelectric cooling systems for high power density electronic devices
نویسندگان
چکیده
Abstract The present article reports on the design, modeling and parametric optimization of a thermoelectric cooling system for electronics applications. An analytical model based energy equilibrium is developed microprocessor using module with an air-cooled finned heat sink. proposed validated by experimental measurements comparison detailed 3D numerical simulations. Estimation effective material properties manufacturer-reported performance characteristics found to reduce uncertainty in calculation input power as compared measurements. A sink carried out maximize coefficient (COP) achieve required capacity microprocessor. effectiveness methodology demonstrated current high microprocessors. At constant current, COP increase increasing geometric ratio. Furthermore, at ratio, increases reach maximum value then decreases. study highlights importance designing fabricating high-performance cooler modules optimum parameters specific electronic components. results indicate that can be increased ~70% optimized non-optimized commercially available modules.
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولSpray cooling characteristics of nanofluids for electronic power devices
The performance of a single spray for electronic power devices using deionized (DI) water and pure silver (Ag) particles as well as multi-walled carbon nanotube (MCNT) particles, respectively, is studied herein. The tests are performed with a flat horizontal heated surface using a nozzle diameter of 0.5 mm with a definite nozzle-to-target surface distance of 25 mm. The effects of nanoparticle v...
متن کاملComparative Study of Spray and Multiple Micro Jets Cooling for High Power Density Electronic Applications
Direct cooling by means of jets and sprays has been considered a solution to the problem of cooling high power density electronic devices. Although both methods are capable of very high heat removal rates it is necessary to be able to decide which one is more convenient than the other when designing a cooling system for electronic applications. In this work the results of an investigation of th...
متن کاملModeling for Parametric System-Level Design Optimization
System-level design refers to a synthesis, analysis, and optimization process which reasons with the system in a holistic manner. We are developing a model-based approach to support parametric system-level design optimization. In this paper, we describe our modeling methodology based on the Environment Relationship net framework (Ghezzi et al. 1991) to represent a system for the purpose of desi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Low-carbon Technologies
سال: 2021
ISSN: ['1748-1325', '1748-1317']
DOI: https://doi.org/10.1093/ijlct/ctab032