Design Methodology for Braided Composite Tubes. 1st Report. Bending Properties.
نویسندگان
چکیده
منابع مشابه
Multi-scale modelling of 3D multi-layered braided composite tubes
The mechanical behavior of 3D multi-layered braided composite tubes was analyzed using a multi-scale modelling approach. Considering the braiding parameters and the fiber volume fraction of the composite tubes, firstly a unit-cell of the composites was determined based on the motion of yarn carriers and modeled using TEXGEN software. The unit-cell was imported into finite element software to ca...
متن کاملComparison of Wood Composite Properties Using Cantilever-Beam Bending
Wood-based composite panels generally are first tested out-of-plane in the primary panel direction followed by the cross panel direction, but rarely edgewise. While most applications use wood-based composites in the flat-wise orientation and only need the out-of-plane properties, there are construction configurations where edgewise properties are needed for improved design configurations. A squ...
متن کاملStudies on Automatic Measurement Technology for Surface Braided Angle of Three-Dimensional Braided Composite Material Performs
This paper describes a new measuring algorithm for three-dimensional (3-D) braided composite material .Braided angle is an important parameter of braided composites. The objective of this paper is to present an automatic measuring system. In the paper, the algorithm is performed by using vc++6.0 language on PC. An advanced filtered algorithm for image of 3-D braided composites material performs...
متن کاملLarge bending deformations of pressurized curved tubes
In this paper, the problem of large pure bending deformations of membrane is considered. The membrane is a sector of torus with a closed cross-section. This membrane is called a curved tube for short. We consider the homogenous, incompressible, isotropic and hyperelastic material. The external load is a constant pressure and bending couples acting at the edges. The equilibrium equations reduce ...
متن کاملCrashworthiness design of multi-cell tapered tubes using response surface methodology
In this article, crashworthiness performance and crushing behavior of tapered structures with four internal reinforcing plates under axial and oblique dynamic loadings have been investigated. These structures have a tapered form with five cross sections of square, hexagonal, octagonal, decagon and circular shape. In the first step, finite element simulations performed in LS-DYNA were validated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1995
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.61.1460