Design methodology accounting for fabrication errors in manufactured modified Fresnel lenses for controlled LED illumination
نویسندگان
چکیده
منابع مشابه
Optical Design using Fresnel Lenses
The Fresnel lens can be used in a wide variety of applications. The basic principles of the Fresnel lens are review ed and some practical examples are des cribed. There are definite advantages and tradeoffs that should be considered when deciding if a Fresnel lens is the appropri ate component to use in a design. Some basic optimization rules are presented which may facilitate a first order ...
متن کاملFreeform lens design for LED collimating illumination.
We present a simple freeform lens design method for an application to LED collimating illumination. The method is derived from a basic geometric-optics analysis and construction approach. By using this method, a highly collimating lens with LED chip size of 1.0 mm × 1.0 mm and optical simulation efficiency of 86.5% under a view angle of ± 5 deg is constructed. To verify the practical performanc...
متن کاملModified Köhler illumination for LED-based projection display
Common projection optics use Köhler illumination to achieve a required lighting. These systems always prevent the realization of a compact optical configuration along with a high lumen output. Based on conventional Köhler illumination, a modified Köhler illumination system for LED-based projection display is presented in this paper, which can significantly reduce the system volume while allowin...
متن کاملSecondary optical element design for intracorporeal LED illumination system.
In this Letter, we propose an intracorporeal illumination system for providing uniform and wide-field illumination during minimally invasive surgery. The illumination system is comprised of an Alexis wound retractor, a set of LEDs, and secondary optical elements (SOEs). The SOE was composed of a Fresnel lens and a total internal reflection lens, which was designed to improve the optical perform...
متن کاملImage-like illumination with LED arrays: design.
An array of spatially distributed light-emitting diodes (LEDs) can produce an illumination pattern that approaches an image by individually modulating each LED. In this letter, I analyze the first-order design of such systems in order to achieve the best match between the illumination distribution and a desired image. In particular, simple formulas are given for the optimal number of LEDs, work...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2015
ISSN: 1094-4087
DOI: 10.1364/oe.23.019743